Guides
Deep dives by topic: formulas, assumptions, common mistakes and worked examples.
How to use these guides
Each guide follows the same order: confirm the use case, check the specs, run the pre-purchase checklist, then decide when not to buy. Start with the guide closest to your situation instead of reading top to bottom.
Prices, terms, and model numbers change; confirm with the vendor site and written support before ordering. For installation, electrical, gas, or health topics, use a licensed professional first.
Last step: verify before ordering
Read the manual, warranty, and return policy for each candidate, and confirm dimensions, power, installation, and local support. If you can get a written answer, do not rely on a verbal chat promise.
After ordering, keep the receipt, order page, and support messages; inspect appearance and function on arrival before deciding to keep it. The earlier you raise an issue, the easier the return; once the return window closes, you are limited to warranty service with more time and shipping cost.
State the problem first
Write one sentence about the problem you are solving, then how you handle it today and what is unsatisfactory. If you cannot write it, you are not ready to buy; trial, rent, or borrow first.
Requirements change, so leave headroom in capacity, ports, and placement. Headroom is not waste; it is an option for the next year.
Support before brand
Support decides how painful a problem becomes. Before ordering, confirm warranty length, mail-in versus on-site service, who pays shipping, and whether spare parts stay available; this usually lives in the terms page, not the product page.
A big brand is not automatically good support. Local service points, support in your language, and average response time often matter more than brand recognition.
Write the decision down
Keep one table with candidates, prices, must-have conditions, and why you dropped each option. Re-read it a day later; that filters most impulse purchases.
If none of three candidates meets the key conditions, adjust the budget or the requirement instead of hunting for a perfect product.
Budget before specs
Budget narrows the shortlist; specs only remove options that cannot do the job. Write down the maximum you will spend, then split it into must-have, nice-to-have, and optional so the number does not creep upward while you read.
Include installation, consumables, subscriptions, and repairs in a three-year cost. Many products look cheap in year one and recover the margin through accessories and memberships; comparing sticker prices alone gives the wrong answer.
Common judgment errors
- Treating sales volume as quality: high volume mostly proves marketing, not fit.
- Treating specs as experience: noise, feel, and support are missing from spec sheets yet affect you daily.
- Treating one review as a conclusion: reviews have incentives and sample bias; read at least three.
- Treating a discount as an opportunity: something you do not need is waste even at half price.
Suggested reading order
- First purchase: read the buying checklist, then the category guide.
- Already own one: read common mistakes and maintenance before deciding to repair or replace.
- Tight budget: read when not to buy so you do not pay for features you will never use.
Sources
Topic index (one-line verdict per topic)
| Topic | One line |
|---|---|
| getting started | Start depends on backup/rate/budget. |
| cost | Cost depends on capacity/inverter/labour. |
| backup power | Backup depends on circuits/duration/price. |
| time-of-use arbitrage | Arbitrage depends on rate spread/cycles. |
| sizing | Sizing depends on load/nights/price. |
| chemistry | Chemistry depends on lfp/nmc/lifetime. |
| hybrid inverter | Inverter depends on solar/offgrid/price. |
| pairing with solar | Solar depends on export/no-export/price. |
| main panel | Panel depends on capacity/derate/price. |
| permits | Permit depends on utility/electrical/price. |
| choosing an installer | Installer depends on licence/quote/price. |
| warranty | Warranty depends on years/throughput/price. |
| degradation | Degradation depends on cycles/temperature. |
| safety | Safety depends on placement/venting/price. |
| compare options | Comparison depends on generator/battery/price. |
| financing | Finance depends on loan/lease/price. |
| rebates | Rebate depends on program/cap/price. |
| timeline | Timeline depends on permit/install/price. |
| checklist | Checklist depends on load/quote/price. |
| FAQ | Faq depends on cost/payback/price. |