Skip to content
Home/Answers/Time-of-use arbitrage
CANADA BATTERY / Time-of-use arbitrage

Time-of-use arbitrage: LFP vs NMC

Time-of-use arbitrage: Compare cycle life, cold performance and install limits.

Updated 2026-11-19About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Time-of-use arbitrage: Compare cycle life, cold performance and install limits. Arbitrage depends on rate spread/cycles.

Why it matters

Start with Spread, Cycles; the cost and outcome of time-of-use arbitrage follow from those.

Step by step

  1. List the circuits and watts you need during an outage.
  2. Find your time-of-use rates and spread.
  3. Size capacity for hours and cycles.
  4. Confirm panel capacity and grid connection permits.

Common mistakes

  • Sizing for whole-home backup.
  • Ignoring a small rate spread.
  • Insufficient panel capacity.
  • Missing the warranty throughput limit.

Checklist

  • Load/spread/capacity/panel/permits.
  • Outage circuit list.
  • Rate bill.
  • Three quotes.
  • Warranty terms.

Who it is for

If you are deciding between two models, put Spread. and Cycles. in one table and compare on the same basis.

Key facts

  • Spread.
  • Cycles.
  • Windows.

FAQ

Time-of-use arbitrage: LFP vs NMC

Time-of-use arbitrage: Compare cycle life, cold performance and install limits. Arbitrage depends on rate spread/cycles.

What should I check before buying a Time-of-use arbitrage?

Arbitrage depends on rate spread/cycles. Key checks: Spread.; Cycles..

Is a Time-of-use arbitrage worth it?

Depends on use, budget and upkeep; a Time-of-use arbitrage is not automatically better because it costs more.

Source: Natural Resources Canada

Top picks

ProductBest forPrice
Battery VendorEquipmentHighCompare options
InstallerInstallMidCompare options
Hybrid InverterInverterMidCompare options

Sources